Tools

The TL-6.3 is a set of tire levers designed to provide all the advantages of both steel and composite tire levers. The steel core with protruding tip offers the strength and leverage needed to securely engage stubborn tire beads, while the durable composite coating...

Practical rack for wall mounting. Provides tidy storage for the screwdrivers. Compatible with all Srewdrivers. Attributes Misc Empty wall mounting rack, hold up to 7 screwdrivers

Tool used to take the disc off the Neo, Neo 2 and Neo 2T; allowing the cleaning of the magnets and coils Attributes Misc T2875.95

Compatible with single-speed bicycle chains including 1/8”, 3/16” and half-link Compatible with all 5 to 13-speed derailleur chains, including SRAM 12-speed Flattop, SRAM 12-speed T-Type, Shimano 12-speed XTR and Campagnolo 13-steed Ekar. Includes removable anvil for peening Campagnolo 11 to 13-speed chains Includes two...

The FCT-1 is a versatile tool for easy and damage-free removal of suspension fork caps, which can be difficult to remove by hand when overtightened. The six sides of the FCT-1 correspond to the most popular fork cap designs for a snug and secure...

Rescue Tool Pod The RTP-1 combines two ride-saving tools — the MTB-5 Multi-Tool and TPT-1 Tubeless Tire Plug Tool — into one ultra-portable package The included tool holder securely holds both tools without adding excess weight, and can be mounted or strapped to most...

Made of forged steel Full 8'' (20.3cm) long for superior leverage Specially designed tip engages tire bead so it can be removed with only two levers Sold as a pair On header card

Professional level kit for installing and removing bearings within bicycle suspension pivots 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters OD (mm): 16, 17, 19, 20.6, 21, 22, 22.3, 24, 26, 28, 28.6, 30, 32 and...

Compatible with 16'' to 29''+ wheels (ISO/ETRTO rim sizes from 317 to 630+) Replaceable M10 threaded tip Low-profile head fits low clearance thru-axle derailleur hangers and Shimano Direct Mount hangers Length: 16.5” (420mm) Weight: 22.75 oz. (645g)

Design allows cassette lockring removal without removing the nut on most quick release skewers Fits 12-spline cassette lockrings (23.5mm diameter) Fits some disc brake lockrings

Versatile and durable two-sided Shop Hammer Forged steel, precision machined striking face Non-marring, replaceable composite tip Fiberglass shaft with soft touch grip Weight: 8 oz. (225g) Head Length: 12” (30.5cm)

TW-6.2 3/8’’ drive Adjustable in 0.25Nm increments 10-60 Newton Meter range (88-530 Inch Pounds) 36.2 cm (14.25’’) length Attributes Drive Type 3/8'' Measurement System Nm Ratcheting Yes

Fits directly onto all PCS-10, PCS-11, PRS-15 and PRS-25 Repair Stands Also fits 2012 and newer PRS-20 and PRS-21 Repair Stands Attributes Misc Tray

Specifically designed for unlocking dirty/rusty master links Attributes Misc MLP-1.2

Repair stand mounted wheel truing stand Securely holds any wheel using a quick-release or threaded axle Adjusts for any wheel diameter and rim width Fits PRS-25, PCS-1, PCS-4 and PCS-10 repair stands

The CC-3.2 is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement

Slides into a hydraulic disc brake caliper to pre-set the piston when replacing pads, aligning pads, and performing other service procedures Attributes Misc PP-1.2

Innovative 3-way Y wrench featuring 3 different sized wrenches to fit internal spoke nipples Features a 3.2mm square drive, and 5mm- and 5.5mm- hex sockets that slip perfectly into the tight surroundings of most rims Works with a variety of wheels: FSA, Blackwell, Planet-X,...

Measures in both mm an inches. Includes gauges for balls bearing and crank cotters. Hard, lightweight aluminum

The 106-AC easily adapts the #106 Work Tray or PTH-1 Paper Towel Holder to fit 35mm–37mm upright tubes on PCS-9 Repair Stands, as well as 2003 and newer PCS-1, PCS-4, PCS-4-1, PCS-4-2 Repair Stands Attributes Misc Accessory collar